Gehl 383Z, Руководство оператора

Страница: 75 / 112

Printed in U.S.A. 4-1 918196/EP0913
CHAPTER 4 – MAINTENANCE
GENERAL INFORMATION
CARE AND SERVICING
Care and Servicing
The care and servicing of the machine has a significant
influence on its operational readiness and service life.
Use of lubricants not corresponding to the manufac-
turer’s recommendations may invalidate warranty
claims.
More frequent servicing, other than the recommended
intervals, may be required under extreme conditions
(extremely dusty or hot conditions).
Always dispose of waste lubrication oils and hydraulic
fluids according to environmental laws or take to a
recycling center for proper disposal.
DO NOT
pour
fluids onto the ground or down a drain.
DO NOT
power-wash the main hydraulic pumps and
controls, throttle solenoids and sealed bearings. High
pressure water can be forced through seals and trapped
within these components, causing premature failure.
The operating pressure settings of the hydraulic system
should only be adjusted by trained, qualified personnel.
If malfunctions are caused by unauthorized alteration
of operating pressure settings, all warranty responsibil-
ities of the manufacturer are invalidated.
WARNING
Read and understand this entire manual
before operating and/or servicing the
machine. Follow warnings and instructions
for operation and maintenance. Check for
correct function after adjustments or main-
tenance. Failure to follow instructions can
result in injury or death.
WARNING
Be sure you are familiar with all safety
devices and controls before operating or
servicing the machine. Know how to stop
before starting. The machine is designed
for use only with approved accessories or
referral attachments. Manitou Americas,
Inc. cannot be responsible for safety if the
machine is used with non-approved attach-
ments.
WARNING
The hydraulic reservoir is under pressure.
Avoid contact with leaking hydraulic fluid
and diesel fuel under pressure because
they can penetrate the skin and eyes.