Gefen GEF-DVI-16416 Скачать руководство пользователя страница 5

Страница: 5 / 80

Congratulations on your purchase of the GefenPRO 16x16 DVI Matrix. Your complete

satisfaction is very important to us.

All GefenPRO products include 24/7 customer support from trained technical service

representatives available at Gefen. This enhanced customer service is ideal for highly

demanding industries such as broadcasting and the rental/staging markets.

GefenPRO

In the realm of video distribution, certain features are invaluable in a commercial or

broadcast environment. Accommodations such as a build-in power supply and flat black

rack-mount enclosures set GefenPRO apart from our traditional products. Complex

distribution units allow for professional DVI, 3G-SDI, and HDMI signals to be routed and

converted easily and seamlessly, while being backed up by a renowned and dependable

technical support team. Gefen invites you to explore the GefenPRO product line and hopes

that you find the solution that fits your needs.

The GefenPRO 16x16 DVI Matrix

Simplify the process of routing up to 16 DVI sources to any of 16 DVI monitors without

losing quality or resolution. The GefenPRO 16x16 DVI Matrix provides a simple, reliable,

and highly effective method of streamlining any installation using multiple sources and

outputs, taking the hassle out of managing multiple connections. Each DVI source is

accessible at all times by any monitor using the front-panel buttons, IR remote unit, built-in

RS-232, Telnet, or using IP control.

How It Works

The GefenPRO 16x16 DVI Matrix has 16 DVI inputs and 16 DVI outputs. Using the

supplied DVI cables, connect 16 sources to the DVI input ports on the GefenPRO 16x16

DVI Matrix’s input side. Connect the GefenPRO 16x16 DVI Matrix’s 16 DVI outputs to the

monitors. Plug in the power cord and power on the GefenPRO 16x16 DVI Matrix. The

connected monitors will show video according to the routing selection.

INTRODUCTION

NOTE:

The GefenPRO 16x16 DVI Matrix only supports DVI-D.

The DVI connectors on the GefenPRO 16x16 DVI Matrix have

29 pins.

Содержание GEF-DVI-16416

















































































Результаты поиска

Содержание GEF-DVI-16416

Отзывы:

Бренды по названию

Популярные бренды

Gefen GEF-DVI-16416, Руководство пользователя

Результаты поиска

Содержание GEF-DVI-16416

Отзывы:

Бренды по названию

Популярные бренды