Geemarc clearsound amplicall 20, Руководство пользователя

Страница: 6 / 16

6
Setting UP Indoor unit
Wall Mounting
1. Drill two holes horizontally, 96mm apart, and leave the
screws protruding from the wall by 5mm.
2. Hang the base on to the two screws and pull the base
down to lock it on
Table Mounting
If you want to mount the unit on the table, only put it into
the base cradle, and then place the base cradle on the
table.
Setting The Alarm Mode
Choose which alarm mode you want to by moving the
alarm mode switch to one of the following position:
0 : no alarm
: both strobe flasher and sound alarm activated
: both strobe flasher and shaker (if connected)
activated
: both sound alarm and shaker (if connected)
activated
Volume Control Slide Switch
Use the slider control to adjust the volume of door bell
ring and phone ring or power OFF.
INSTALLATION