Geemarc clearsound amplicall 20, Руководство пользователя

Страница: 8 / 16

8
Note: Do not use a rechargeable battery. Do not put the
used battery into the household rubbish, pay attention to
battery regulations regarding battery disposal.
The Pairing Procedure:
1. Press and hold the Pairing/Test button until the unit
makes a beep sound, release the Pairing/Test
button, then the 1
st
LED lights to enter pairing mode.
2. Press and hold the Pairing/Test button again until the
1
st
LED flashes, then press and hold the remote
button at the same time until the strobe flasher LED
flashes, the unit makes a beep sound to confirm
pairing successfully.
3. If user wants to pair the 2
nd
or 3
rd
remote, when the
1
st
LED lights, press the Pairing/Test button once, the
1
st
LED goes off and then the 2
nd
LED lights. User is
able to pair the 2
nd
remote, repeat the same
procedure for the 3
rd
remote.
4. Repeat the above, all 3 LEDS flashing together for
the 4
th
remote pairing.
Un- Register The Pairing:
1. Press and hold the Pairing/Test button for 5 seconds
to enter un-register mode, 3 LEDs flash together.
2. If user wants to un-register the 1
st
remote, press the
Pairing/Test button once, the 1
st
LED will be flashing
INSTALLATION