Geemarc clearsound amplicall 20, Руководство пользователя

Страница: 7 / 16

7
Tone Control Switch (3 Positions)
Set the tone of the alarm sound.
Door Bell Tone Control
The three position switch allows you to set a different
tone when the door bell rings.
Change the Battery of Indoor unit
The unit requires 4×AA batteries
1. Open the battery door.
2. Insert four AA batteries into the compartment.
3. Snap the battery compartment door back into place.
Note: when the red indicator keep flashes, replace the
batteries. During replacement of the batteries, disconnect
all telephone line cords from the wall modular jacks.
You can add one adaptor in option (contact 01 707-
384438)
Change the Battery of the Door bell
The door bell is supplied with a A 23 12V battery. The
Door bell is supplied ready to use, it is not necessary to
open the Door Bell when you first install the Amplicall 20.
To replace the battery, unscrew the door bell from the
wall, unscrew the five screws located on the base and
open the box to get access to the battery compartment.
Replace the battery, replace back and remount.
INSTALLATION