GeekChef YBW100P, Руководство пользователя

Страница: 22 / 56

CARE AND CLEANING
Regular care or maintenance is essential in ensuring that GeekChef pressure
cooker is safe for use. The GeekChef pressure cooker must be cleaned thoroughly
after each use in order to avoid staining caused by a build-up of food or cooking
residue.
WARNING
Unplug your GeekChef pressure cooker and let it cool to room temperature
before cleaning.
DO NOT POUR COLD WATER INTO A HOT GeekChef pressure cooker.
Always remove the Pressure Valve and clean the opening with pin to remove any
blockage that might have occurred during the cooking process. This must be
done after each use.
Do not try to repair pressure valve yourself. Contact customer service for qualified
repair information.
CAUTION
• Both the inner pot and lid are dishwasher safe.
• Remove the inner pot and lid and wash with detergent. Rinse with clear water and
wipe dry with a soft cloth.
• Wipe the inner cooker base rim and slot dry with cloth to prevent rusting of the
exterior cooker rim.
• Remove the lid filter plate and anti-block shield from the underside of the lid.
Wash with warm, soapy water, rinse with clear water and wipe dry with a soft cloth.
• When cleaning the lid filter plate, the Silicon Gasket must be removed and washed
separately with warm, soapy water, rinse with clear water and wipe dry with a soft
cloth.
• The Silicon Gasket must always be properly positioned on the Lid Filter Plate.
• Clean the outer body with a damp soft cloth or sponge.
• Never use harsh chemical detergents, scouring pads or powders on any of the
parts or components.
• Periodically check that the pressure valve and float valve are in good working order
and free of debris.
• Never immerse the outer housing and power cord in water or any other liquid.
19 20
TROUBLESHOOTING
PROBLEM PROBABLE CAUSE SOLUTION
Silicon gasket is not properly
installed
Position the silicon gasket well.
Float valve in the popped-up
position
Slightly press the float valve
downward.
Pressure exists inside the cooker
Position the steam release
valve to the venting position to
reduce the internal pressure.
Open the lid after the pressure
is completely released.
Float valve stuck at the popped-up
position.
Press the float valve lightly with
a pen or long utensil.
No silicon gasket (sealing ring) Install the silicon gasket
Food debris attached to the silicon
gasket
Clean the silicon gasket
Silicon gasket or lid filter plate
damaged
Replace the silicon gasket or lid
filter plate
Lid not closed properly
Open then close the lid again
Difficulty with
closing the lid
Steam leaks
from the rim of
the lid
Difficulty with
opening the lid
Food debris on the float valve
silicone seal
Clean the float valve silicone
seal
Float valve silicone ring worn-out
Replace the float valve silicone
ring
Steam leaks
from the float
valve