GeekChef YBW100P, Руководство пользователя

Страница: 10 / 56

7 8
2. Remove the inner pot and place cooking ingredients inside. Monitor the level of
the water and ingredients per cooking instructions to ensure they do not exceed
the MAX LINE “4/5” marking on the inner pot (see picture 4). Rice, beans, or other
ingredients that will expand during cooking should not be filled beyond the “10 CUP”
marking (see picture 5). Liquids and ingredients together should never fill less
than the “4 CUP” marking on the inner pot (see picture 6).
3. Clean and towel dry the external surface of the inner
pot, place Inner Pot inside the cooker, rotating it slightly
to ensure proper contact with the heating element. Make
sure there is no material between the inner pot and the
exterior pot before you insert it into the cooker (see
picture 7).
4. To close Lid, place lid on pressure cooker, turn handle counter-clockwise to
CLOSE position as indicated on handle, until lid locks in place (see pictures
8 to 11).
Make sure lid is closed and properly aligned before use.
NOTE
INSTALL THE CONDENSATION COLLECTOR
The condensation collector easily picks up any moisture
that my drip off when using your pressure cooker. Simply
align and push the collector into the channels on the back
of the cooker. Empty and clean after each use.
REMOVE AND INSTALL THE LID FILTER PLATE
Silicon Gasket must always be properly positioned on the Lid Filter Plate when
install the Lid Filter Plate to the underside of the lid.
NOTE
INSTALL THE ANTI-BLOCK SHIELD
To install: Position the Anti-Block Shield in place and push down
To remove: Using your thumb, push the side of the Anti-Block
Shield towards the lid rim and lift up with some effort.
The Anti-Block Shield should pop out.
Press down Pull up