GeChic On-Lap 1502, Руководство пользователя

Страница: 8 / 17

6
Section 3 Connect the 5V 2A Charger (Optional)
If wish to have On-Lap 1502 use independent power
source, use 5V 2A Charger to provide 5V DC and not
use power from laptop, please refer to diagram.
Connect 5V 2A Charger to Micro USB port (DC IN) of
On-Lap 1502. At this time, On-Lap 1502 will only use
power from DC IN port.
*Do not disconnect the USB Touch Output and Power Cable
from On-Lap 1502 USB port, or else touch function cannot
be used.
Section 4 Install the VESA 100 Mount (Optional)
From diagram below, place VESA 100 mount to mount arm or wall mount, use
four screws to secure the holes.
Place On-Lap 1502 onto VESA 100 mount, secure with four screws.
* If need to adjust monitor position, please use two hands to hold VESA 100 mount to
adjust, do not apply force onto On-Lap 1502 body. Excessive force onto On-Lap 1502
body may result in monitor glass become broken.
Fig.: Place the VESA
100 onto mount arm
VESA 100
Mount Arm
Fig.: Place On-Lap 1502
onto VESA 100 mount