background image

GECA

 Srl   

Via E. Fermi, n°98  25064 Gussago (BS) 

Italy Tel. +39 030 3730218  

www.gecasrl.it

Tecnocontrol 

Srl   

Via Miglioli, n°47  20090 Segrate (MI) 

Italy  Tel. +39 02 26922890 

www.tecnocontrol.it

TECHNICAL CHARACTERISTICS

- Power supply:    

230Vac, 50/60Hz 4,6VA / 12 Vcc 2.5W

- Power consumption:  

20mA max

- Operation temperature:  

-10°C…. +40°C

- Relative humidity:  

30%…. 90% RH

- Alarm threshold at 10% of the LEL (lower explosive limit) of the gas.

- Warming up period after the instrument is switched on: about 1 minute

- Acoustic level of buzzer:   85 dB (A) at 1 meter.

- Electronic self-diagnosis with signal to indicate malfunction.

- Rated to:  

 

IP42

- Remote unit input.

- Conforms to standard IEC UNI EN 50194-1:2009

GENERAL TERMS OF THE GUARANTEE

THIS CERTIFICATE IS THE ONLY DOCUMENT THAT ENTITLES

YOU TO REPAIR OF THE PRODUCT UNDER THE TERMS OF THE 

GUARANTEE.

- The product is GUARANTEED for a period of 24 months from the date of 

purchase.

- The GUARANTEE does not cover damage caused by tampering, incorrect 

or improper use and installation.

- The GUARANTEE is valid only if it is duly compiled.

- In the event of defects covered by the GUARANTEE, the manufacturer will 

repair or substitute the product free of charge.

SERVICING AFTER THE GUARANTEE PERIOD:

Any repairs after the period of the GUARANTEE will be charged on the basis 

of the parts substituted and the cost of labour.

GUARANTEE CERTIFICATE

TO COMPILE AND SEND IN CASE OF DAMAGE

DEVICE:       SE330KM         SE330KG          SE333KM          SE333KG

Serial  number  (s.n.)____________________________________________________
DEALER
Stamp:    

 

 

 

      Date of purchase:

 

 

 

 

 

     _____/_____/_____

USER
Surname and name ____________________________________________________
Address __________________________________________ n°_________________
Postcode ______________________ Town/city _____________________________
Telephone____________________________________________________________

TO BE COMPILED BY THE INSTALLER:
Date of installation _____________________________________
Date of replacement ____________________________________
Attention: the detector must be replaced 15 years after the 
date of installation on this voucher.
Site of installation ______________________________________
Serial number (s.n.) ____________________________________
(Written on the inside of the plastic container).
Date of initial replacement of 

Sensor Module:________________

Date of second replacement of 

Sensor Module:______________

Attention: the entire detector must be replaced five years after 
second replacement of the Sensor Module.

 

 

 

 

 

Stamp

Signed _________________________________________________

The manufacturer firm reserves the right to make any aesthetic or functional  modification to the without prior 

notice at any time.

dis. 0134152E   cod.2.710.2335

7

Содержание Tecnocontrol Beta Series









Отзывы: