Geca Roma Wi-Fi, Полное руководство

Страница: 24 / 60

24
LOCK WITH PASSWORD
To activate the display, just touch it.
Press the “ ” and “ ” buttons (Fig. 66) for about 2 seconds to access the PASSWORD set-
ting screen (Fig. 67).
The numbers
“0000” represent the digits that make up the PASSWORD.
Use the “
+C
” or “
-C
” buttons to change the flashing digit.
Press the “
-H
” or “
+H
” buttons to move to the next or previous digit.
Confirm the set PASSWORD by pressing and holding the “ ” button (Fig. 68).
Fig. 66 Fig. 67 Fig. 68
When the “ ” symbol is shown, (Fig. 69), the programmable thermostat is locked and you
cannot change any parameter until you unlock it. However, you can change the parameters using
a mobile device.
You can exit the password setting at any time simply by pressing the “ ” button, or by waiting
12 seconds without touching the programmable thermostat’s display.
To unlock the programmable thermostat, press the “ ” symbol and enter the PASSWORD.
Confirm the PASSWORD by pressing the “ ” button (Fig. 70).
If the PASSWORD is correct, the “ ” symbol will no longer be shown on the programmable
thermostat. Otherwise, “ Err ” will be shown, meaning that the PASSWORD you entered is wrong
(Fig. 71). If needed, repeat the step.
Fig. 69 Fig. 70 Fig. 71
N.B. If you have forgotten your PASSWORD, contact support.
+H -H
-C
+C
+H -H
+C
+H
-H
-C
+C
L U
L U
+H -H
+C
L U L U