Geca Roma Wi-Fi, Полное руководство

Страница: 16 / 60

RESET (WI-FI MODULE)
Access the WIFI submenu from the Home Screen and select rSt .
- Press rSt for about 2 seconds to RESET the Wi-Fi network connection (Fig. 22).
The display will show “ In It ” (Fig. 23), to show that the Wi-Fi network connection "RESET" pro-
cedure is initializing.
N.B. The RESET function can be turned on only when the Wi-Fi module is ON.
Immediately after the Rome Wi-Fi programmable thermostat is placed in the Home Screen.
To restore connection to the Wi-Fi network, repeat the CONFIGURATION procedure.
This function resets the Wi-Fi module to its factory settings.
Therefore it deletes the entire configuration of the Wi-Fi connection .
16
-H
Fig.22 Fig.23
+H -H
Hour
Access the Setup Menu from the Home Screen by pressing the measured TEMPERATURE area
and the TIME area together, for 2 seconds.
-Press the “
-H
” or “
+H
” buttons to access the Hour item (Fig. 24).
-Press Hour for about 2 seconds, until " AUto ” is shown. (Fig. 25). 25).
Press AUto for about 2 seconds, until it flashes to TURN ON automatic time synchronization. (Fig.
25).
In AUTo mode, the programmable thermostat automatically updates the time via a time server.
Press “ MAn ” for about 2 seconds, until it flashes to TURN OFF automatic time synchronisation.
(Fig. 26).
In “ MAn ” mode, you must manually set the the programmable chronothermostat’s time using the
app or directly on the device. Press the “
+H
” button to access the EXIt item to exit the menu
Press “ EXIt ” to return to the Home Screen .
+H -H
+H -H
+H -H
Fig.24 Fig.25 Fig.26