EN
40
B1157-002 © 01-2015
966.475.00.0 (01)
LED displays for
<General
malfunction>
and <Welding
procedure>
light up
Defective Geberit
electrofusion
coupling or
defective Geberit
electrofusion tape
for anchor point
`
Disconnect the mains
plug
`
Visually inspect the
contacts on the sleeve
connection cables and
dry or clean them if
necessary
`
Use a new Geberit
electrofusion coupling or
a new Geberit
electrofusion tape for
anchor point
Sleeve connection
plug removed
during the welding
procedure
`
Disconnect the mains
plug
`
Press the start button and
hold for three seconds
`
Repeat the welding
procedure with the cooled
Geberit electrofusion
coupling or the cooled
Geberit electrofusion
tape for anchor point
LED displays for
<General
malfunction>
and <Welding
complete>
light up
Electrofusion
machine is
overheating or
operating at too
high an ambient
temperature
`
Let electrofusion machine
cool down until the
trouble indication goes
out. Do not disconnect
machine from power
supply system so that the
fan operates
`
Do not expose the
electrofusion machine to
direct sunlight
Fault
Cause
Actions
