For additional technical assistance, call 800/TEC-TRUE (800-832-8783) or visit our website at chicagofaucets.com.
3
HyTronic
®
User Guide Installation Instructions
(continued)
Mounting of Long Term Power System (LTPS) Pack (LTPS Models Only)
The LTPS Power Pack comes with mounting hardware (screws and anchors). You will need a drill and Phillips screwdriver to complete the
installation.
1. Mount faucet by following the
standard mounting instructions
on page 2.
2. Position LTPS unit on wall
and mark mounting holes on
mounting surface.
3. Drill holes for
screw anchors.
4. Insert anchors into holes and
mount LTPS unit to wall with
supplied screws.
5. Connect spout wire to LTPS
connector wire, making sure
connectors are oriented
correctly.
6. Remove protective
covering from sensor.
Wait 15 seconds for faucet to
calibrate to its environment.
LTPS End of Life Directives:
In an effort to produce environmentally conscious products, the
LTPS contains materials that are required be recycled by specialized
companies. Please ensure you dispose of your LTPS according to
local regulations. Follow applicable laws and regulations for transport,
shipping, and disposal of batteries. For details on, and locations
for recycling lithium-based batteries, please contact a government
recycling agency, your waste-disposal service, or visit reputable online
recycling sources such as www.call2recycle.org.
