Performance Parameters
USB Version
1.0, 1.1, and 2.0 Standards compliant
Serial Signal Supported
RS-485, RS-422 TIA/EIA Standard
USB Signal
VCC DATA+, DATA-, GND, FG
RS-485 Signal
T/R+, T/R-, GND
RS-422 Signal
TXD+, TXD-, RXD+, RXD-, GND
Working Mode:
Asynchronous working, point-to-point or point-to-multipoint 2 wires (half duplex)
4 wires (full duplex)
Direction Control
Adopt the technology which automatically controls the data-flow ddirection,
automatically distinguish and control the data-transmission direction.
Transmission Rate
300-921600bps, Automatically detect the serial port signal rate
Load Capability
Support point-to-multipoint transmission. Each converter can connect 32 RS-422
or RS-485 interface equipment
Transmission Distance
RS-485/422 port: 1.2km (921600bps-300bps).USB port: No more than 5 meters.
Interface Protection
600W lightning strike and surge protection and ±15KV ESD protection.
Interface form
USB port: A type male interface. RS-485/422 port: 5-pin connection pole.
Signal Indication
3 LED’s for Power(PWR), Send(TXD), and Receive (RXD)
Transmission media
Twisted-pair cable or shielded cable.
Dimensions
62mm x 33mm x 19mm
Working environment
-40° to 85
℃
, relative humidity 5% to 95%.
Operating System
Windows95/98/2000/XP/Vista, IMAG supported.
Connector and Signal
RS-485, RS-422 data output, connector, and bay-line distribution.
Connection pole
Data Output
RS-422 Full-Duplex
RS-485 Half-Duplex
1
T/R+
Send (A+)
RS-485 (A+)
2
T/R-
Send (B-)
RS-485 (B-)
3
RXD+
Receive(A+)
N/C
4
RXD-
Receive(B-)
N/C
5
GND
Ground Wire
Ground Wire
