Model Nubmer: PG467
Brand Name: Gear4
User
Manual
Getting Started:
1.
Remove the battery cap compartment from the bottom of the UnityRemote
device by turning it counter clockwise
[Battery cap removal gfx]
2.
Insert the 3x AA batteries provided and close the battery compartment cap
by rotating it clockwise.
Powering
Unity for the first time
1.
Press the button located on the side of UnityRemote for half a second to
switch it on. The red steady light will stay on for 3 seconds to indicate
UnityRemote is powered up.
[Show Power button]
2.
UnityRemote's status LED will slowly blink to indicate it is in pairing mode. If
the LED does not blink, press the button for half a second to switch
UnityRemote off. Then press and hold the button until the solid light turns
into a blinking light.
[Show LEDs]
3.
On your iPhone, iPod touch or iPad, open the Settings panel. Tap on General >
Bluetooth.
4.
Ensure that Bluetooth is turned on and after a few seconds UnityRemote will
appear in the list of devices (on some versions of iOS, UnityRemote may
appear as 'Misc'). Tap on it to start the pairing process
5.
Your iPhone will display a warning message asking if you wish t
o allow
UnityRemote to pair to your device. Tap yes.