AUTOMATIC ROASTING
Auto Roast uses the temperature probe to cook
Just as in regular roasting, only tender roasts should ,
–
to the desired serving temperature. Unlike Temp
be Auto Roasted until specified internal temperatures
Cook/Hold, which uses a single power level, Auto
are reached. Less tender roasts should be microwaved
Roast uses up to 3 power settings which automatically
by time.
switch during roasting, thus providing even, tender
cooking results without overcooking.
Preparing Roasts for Auto Roasting
Wax
paper
Place tender beef roast on a trivet
in microwave-safe dish. Insert the
probe horizontally into the center
Pork or ham roasts need no trivet.
meaty area not touching bone or
Add 1/2 cup water to roast dish
fat. Make sure the handle does not
and cover with plastic wrap. Allow
touch the food or top or sides of
room for the probe when covering.
the oven. Cover with wax paper.
Place the meat in the oven with the
probe to the right. Insert the cable
end of the probe firmly into the
receptacle on the oven wall.
How to Auto Roast Beef to Medium
1. Press the AUTO ROAST pad.
u
ROAST
2. Press the number pad 2.
3. Press the START pad. The display shows “COOL”
and “ROAST CODE 2“ until the food temperature
reaches 80°F.
4. At 80°F., the display switches to show the meat’s
internal temperature.
5. When you select Auto Roast codes
3 or 4,
the oven control signals with 3 beeps and
flashes on the display when it’s time to turn the
roast over.
6. After you turn the roast, close the door and press
the START pad.
7. After a preprogrammed food temperature is
reached, the oven control signals times and
the oven shuts off.
NOTE: The oven continues to cook after the signal
whether or not the roast is turned over.
Automatic
Auto Roast code 6
Total time includes time to bring food to
and
The oven switches to “HOLd” at 180°F. until you
hold at that temperature until done.
remove the food and turn the oven off. If stirring
Set Auto Simmer like Auto Roast. See the Auto
is recommended, you can reset the oven by
Roasting section. The display shows “COOL” until
pressing the START pad. Press the
pad
the food is
then switches to show the food’s
after cooking.
temperature until
is reached.
Содержание JHP69GN
Страница 10: ...wFEATURES OF YOUR COOKING CENTER L I H 10 ...