GEAppliances JDP46, Руководство по установке

Страница: 14 / 16

14
Alternate Construction
Installation Instruction Preparation
Optional Maintop Filler or
Backguard Kit
AA
AB Island Installation
When installing in an island or other non-
standard location, countertop cutout
dimensions must be according to page 5.
For the anti-tip bracket instructions see page
9.
In this application, do not use Backguard Kit
(JXS36XX or JXS39SS).
AC
AD
Cabinets over the Range less
than 30”
If a 30” clearance between cooking surface
and overhead combustible material or metal
cabinets cannot be maintained, protect the
underside of the cabinets above the cooktop
with not less than 1/4” insulating millboard
covered with sheet metal not less than
0.0122” thick.
If counter opening extends to the wall, it will
require Maintop Filler Kit (JXS66XX) or
Backguard Kit (JXS36XX or JXS39SS) to close
the gap.
Note: If the counter top is greater than 25”, it will
show a gap between the backguard and wall or
between filler kit and the wall.
If the countertop is less than 25”, a gap will occur
between the countertop front and the control
panel ends (See page10- D3).
Refer to the Filler or Backguard Kit instructions
for Installation details.
Optional Lower Trim to fill space
beneath 27 1/4” Min. requirement (See
page 4) Use lower Trim Kit JXS96XX.
Cabinet cutout height more
than 27 1/4” Use Lower Trim
Kit
25"
Must Be
Level
Must Be
Flat
Must Be
Flat
30"
Smooth Cut
Must Be Level
Wall
9"
_
16
9"
_
16