GEAppliances JDP46, Руководство по установке

Страница: 9 / 16

Standard Installation Instructions
D
Installation Instructions
9
D1
The anti-tip bracket is attached to the back
of the Drop-In Range. It is designed to fit
under the bottom of the countertop
opening at the rear. Measure counter
thickness at back of cutout to determine
correct bracket location.
Installing the Anti-Tip Bracket
(continued on following page)
1 for 3/4” counter
2 for 1.18” (3cm) counter
5 Alternate (Shown Below)
3 for 1.5” counter
4 for 3.5”
Select the proper position for the countertop
thickness and move bracket to proper position.
(Unit is supplied with bracket in position 1.)
Wire
Cover
Wall
Stud
Anti-Tip
Bracket
Bottom of
Countertop
To Engage
Bracket By
1/2" Min.
Glass Maintop
Interior Wall
ANTI-TIP
INSTALLATIONS
Bottom of
Countertop
Countertop
Thickness
Min. 1/4" Flat Area
Attachment
Anchored to
Wall Stud Is
Required
Anti-Tip
Bracket
Attachment
To Engage
Bracket By 1/2" Min.
Position #5
Non Kit
Applications
1-1/2"
10 - 3/8"
Attachment
*
Wire
Cover
Wall
Stud
Glass Maintop
Interior Wall
ALTERNATE ANTI-TIP
INSTALLATIONS
Countertop
Surface
Non Kit Application
1
2
3
4
5
Anti-Tip Bracket Location
( Rear of Range )
Glass Cooktop