Consumer Support
Troubleshooting T
ips
Operating Instructions
Safety Instructions
Installation Instructions
13
7
Install the Window Filler Panels and Locking Bracket
Insert the cut edge of the filler panel into the
case side seal groove.
Leave a small space at the bottom
of the case side seal groove.
Flex and push the filler panel backward
toward the window frame until it clears the
window stool.
Slide the filler panel out from the air
conditioner case. Make sure it contacts the
window molding.
Slide the filler panel into place.
Use upholstery tacks to attach the filler panel
to the face of the window molding through the
holes provided.
Pull the sliders out until they contact the
face of the window molding. (Note: If a
slider has slipped into the top retainer bar
and cannot be pulled out, use the slider on
the other side to tap it out.)
Pull the window down tightly and lock it in
place with 5/8
″
screws.
Attach through the holes on
each side of the window sash
Attach the window locking bracket with
a 5/8
″
screw.
G
F
E
D
C
B
A
Case
Attach
