Consumer Support
Troubleshooting T
ips
Operating Instructions
Safety Instructions
Installation Instructions
11
4
Install the Side Seals and the Case in the Window
Open the window and mark the centerline
on the stool.
Attach the case side seals on the outside of the
case by using three 3/8
″
hex-head screws on
each side.
Place the sliders, one on each side, into the top
retainer bar.
Carefully place the case in the window and
align the center of the bottom tie bar with the
centerline on the window stool. Do not release
your grip on the case until the window is in its
final position.
Close the window until it touches behind the
top retainer bar. Do not close the window so
tightly that the sliders cannot move.
Secure the case to the window stool using two
1
″
screws on each side.
F
E
D
C
B
A
Mark centerline
Attach
side seals
Top retainer bar
Slider
Top retainer bar
Slider
Slider
Four 1
″
screws
