GEA VARIVENT TSVN, Инструкция по эксплуатации

Страница: 11 / 48

•
Only use the valve for its intended use.
• The valve must be functional and in good working order. Check the condition
of the valve before starting work and at regular intervals.
•
Wear tight-fitting work clothing for all work on the valve.
• Ensure that nobody can get hurt on the parts of the valve.
• Immediately report any faults or noticeable changes on the valve to the
person responsible.
• Never touch the pipes and the valve when these components are hot! Avoid
opening the valve unless the process plants have been emptied and
depressurised.
• Observe the accident prevention regulations and all local regulations.
2.4.1.1 Safety instructions
Dangerous situations during operation can be avoided by safety-conscious and
proactive behaviour of the personnel.
For operation, the following principles apply:
•
Monitor the component during operation.
• Safety devices must not be changed, removed or taken out of service. Check
all safety devices at regular intervals.
•
All guards and hoods must be fitted as intended.
• The installation location of the component must always be properly ventilated.
• Structural changes to the component are not permitted. Report any changes
to the component immediately to the person in charge.
• Always keep danger zones clear. Do not leave any objects in the danger
zone. Only allow persons to enter the danger zone when the machine is de-
energized.
• Regularly check that all emergency stop devices are working correctly.
2.4.2 Environmental Protection
Harm to the environment can be avoided by safety-conscious and proactive
behaviour of the staff.
For environmental protection the following principles apply:
• Substances harmful to the environment must not be discharged into the
ground or the sewage system.
• Always observe the pertinent regulations relating to waste avoidance,
disposal and utilization.
• Substances harmful to the environment must be collected and stored in
suitable containers. Clearly mark the containers.
•
Dispose of lubricants as hazardous waste.
Safety
General safety instructions and dangers
430BAL008565EN_1
21.03.2022 11