Safety
Instructions for the Safe Operation
12
Operating Instructions GEA Orbital Cleaner Jumbo 6
Edition 2016-05-24
Instructions for the Safe Operation
Dangerous situations during the operation can be avoided by safety-cons-
cious and proactive behaviour of the staff.
General Principles
To ensure the safe operation of the cleaner the following principles apply:
•
The Operating Instructions must be kept ready to hand at the cleaner's
place of use. It must be complete and in clearly legible form.
•
Only use the cleaner for its intended use.
•
The cleaner must be functional and in good working order. Check the
condition of the cleaner before starting work and at regular intervals.
•
Wear tight-fitting work clothing for all work on the cleaner.
•
Ensure that nobody can get hurt on the parts of the cleaner.
•
Immediately report any faults or noticeable changes on the cleaner to the
person responsible.
•
Observe the accident prevention regulations and all local regulations.
Installation
For installation, the following principles apply:
•
Only properly qualified staff is allowed to fit and set the cleaner into
operation.
•
Observe the transport instructions and markings on the part(s) to be
transported.
•
Remove any nails protruding from transport crates immediately after
opening the crate.
•
Under no circumstances should anyone stand under a suspended load.
•
During assembly, the cleaner's safety devices might not be working
effectively.
•
Reliably secure machine parts which have already been connected
against inadvertently being switched on.
Commissioning/Setup Mode
For commissioning, the following principles apply:
•
Take protective measures against dangerous contact voltages in accor-
dance with pertinent regulations.
•
The cleaner must be completely assembled and correctly adjusted. All
screw connections must be securely tightened. All electrical cables must
be installed correctly.
•
Reliably secure machine parts which have already been connected
against inadvertently being switched on.
•
After conversion of the cleaner, residual risks must be reassessed.
