GEA Bock HGX2 CO2 T Series, Инструкция по ремонту

Страница: 14 / 24

09
430
-08
.2
01
6-
Gb
14
max.
75kg
¾
Align the stator so that the cable harness is positioned upwards and the feather key is aligned with the groove of the
stator.
X
Do not damage any cables and components . Push the stator with the cables leading into the motor housing up
until the dimension X (see table, page 12). Motors without dimension X are inserted up to the stop into the compressor
housing.
X
At the same time, carefully pull the cables upwards through the terminal board opening.
¾
Align the stator so that the countersink for the threaded pin in the stator is aligned with the countersink of the female
thread in the compressor housing.
Assembly instructions for HGX2 CO
2
T, HGX34 CO
2
T and HGX46 CO
2
T from design key A054
Assembly