background image

Auxiliary controls on your Zoneline.

$X[LOLDU\&RQWUROV³7HUPLQDO&RQQHFWLRQV

The auxiliary controls are located behind the room cabinet 

beneath the access cover.

1

  Turn off and unplug the unit.

2

  Remove the room cabinet. See the To Remove the Room 

Cabinet section.

3

  To make wiring connections, insert the connectors into 

the appropriate terminals on the control box.

4

  After all desired connections have been made, replace the 

access cover and room cabinet.

 

The owner is responsible for making all connections and 

setting the appropriate AUX SET mode. 

NOTICE:

Improper wiring may damage the Zoneline electronics. No 

common busing is permitted. Damage or erratic operation 

may result. A separate wire pair must be run from each 

separate controlling switch to each individual Zoneline.

10

This electric heat option functions only on the AZ65 model. 

When this option is ON “     

 

,”  heat pump operation is locked 

out, causing the unit to provide only electric resistance heat.
To set All-Electric Heat option, press MODE until an 8 

appears in the first digit of the display. Press the 

or 

pad to set this switch to OFF “      “ or ON “      .” This is shown 

in the second digit of the display. 
Press AUX SET to confirm your selection and exit AUX SET 

mode, or press MODE to continue setting other functions. 

The default setting for Mode 8 is OFF.

When Heat Boost is ON and outside temperatures are 

between 25ºF and 46ºF, heat pump only operation is 

locked out. This setting is used to provide supplementary 

heat to the heat pump operation by electric resistance 

heat in conditions where the heat pump-only operation is 

not sufficient to maintain a consistent, comfortable room 

temperature.
To set Heat Boost, press MODE until a 9 appears in the first 

digit of the display. Press the 

or 

pad to set this switch 

to OFF “       “ or ON “       .” This is shown in the second digit 

of the display. Press AUX SET to confirm your selection and 

exit AUX SET mode. 

The default setting for Mode 9 is OFF.

All-Electric Heat (AZ65 only)

MODE 8

Heat Boost (AZ65 only)

MODE 9

All-Electric 

Heat OFF

All-Electric 

Heat ON

Heat Boost OFF

Heat Boost ON

Red  

Aux Set  

Button

Содержание Zoneline AZ45





























Отзывы: