– 51 –
CN102
(Continued next page)
9. Remove the 4 Phillips-head screws from the
vent side of the fan shroud.
6. Remove the 4 Phillips-head screws from the 2
top brackets that hold the fan shroud in place.
Remove the brackets.
Fan Shroud
7. Remove the 2 Phillips-head screws that hold the
fan bracket to the bottom of the chassis.
8. Remove the 4 Phillips-head screws from the
compressor side of the fan shroud.
3. Lift the control panel from the 2 top tabs. (See
Control Assembly
.) Position the control panel to
the right.
4. Remove the control box cover. (See
Control Box
Components
.)
5. Disconnect the outdoor fan wiring at CN102 on
the drive board and remove all associated wire
ties. (See
Control Box Components
.
)
