manualshive.com logo in svg

GE VMIVME-7805, Справочник по аппаратуре, Страница: 75 / 81

Поделиться
Скачать
GE VMIVME-7805 Скачать руководство пользователя страница 75

Appendix C: OS and System Driver Software  75

To upgrade from a network connection:

 

1.  Using your current operating system, establish a connection to the shared 

network folder that contains the Setup files. If you have an MS-DOS or      
network installation disk that contains network client software, you can use 
that disk to connect to the shared folder. Your network administrator will be 
able to provide you with this path. 

2.  At the command prompt, type the path to the file setup.exe. 

3. Press ENTER. 

4.  Select Upgrade, and then click Next. 

5.  Follow the instructions that appear on your screen.

C.4 Ethernet Drivers Installation

1.  Insert CD-ROM 385-000027-000.

2.  Right click on My Computer and select Manage.

3.  In the left pane of the Computer Management window, select Device 

 

Manager.

4.  In the right pane, double click on the first Ethernet Controller under Other 

Devices.

5.  Click the Reinstall Driver button.

6. Click Next.

7.  Select 'Search for a suitable driver for my device' and click Next.

8.  Deselect 'Floppy disk drives' and select 'Specify a location'.

9. Click Next.

10.Click the Browse button and browse to the root of the CD-ROM inserted   

earlier.

11.Browse into the WIN2K or WinXP (OS dependent) folder and then into the 

i82540EM folder.

12.Click Open.

13.Click OK. 

14.Click Next.

15.After files have been installed, click Finish.

16.Click Close.

17.Click X to close the Computer Management window.

Содержание VMIVME-7805


















































































Отзывы:

Нет отзывов