GE VMIVME-7805 Скачать руководство пользователя страница 10

Страница: 10 / 81

10 VMIVME-7805/VME-7805RC Hardware Reference Manual

Organization

This manual is composed of the following chapters and appendices:

Overview

provides a general description of the VMIVME-7805/VME-7805RC and

General Safety terms and symbols.

Chapter 1 Handling and Installation

describes unpacking, inspection, hardware

jumper settings, connector definitions, installation, system setup and operation of
the VMIVME-7805/VME-7805RC.

Chapter 2 Standard Features

describes the unit design in terms of the standard PC

memory and I/O maps, along with the standard interrupt architecture.

Chapter 3 - Embedded PC/RTOS Features

describes the unit features that are

beyond standard functions.

Maintenance

provides GE contact information relative to the care and

maintenance of the unit.

Compliance

provides applicable information regarding regulatory compliance.

Appendix A

Connector Pinouts

illustrates and defines the connectors included in

the unit’s I/O ports.

Appendix B - AMI BIOS

describes the menus and options associated with the

American Megatrends, Inc. (system) BIOS.

Appendix C - System Driver Software

provides details for installing drivers under

Windows 2000 and Windows XP.

Appendix D - Argon BIOS

describes the menus and options associated with the

remote Ethernet booting BIOS.

Appendix E - Sample C Software

provides listings of a library of sample code that

the programmer may utilize to build applications.

Содержание VMIVME-7805


















































































Результаты поиска

Содержание VMIVME-7805

Отзывы:

GE VMIVME-7805, Справочник по аппаратуре, Страница: 10 / 81

Результаты поиска

Содержание VMIVME-7805

Отзывы: