GFK-2721A
3-1
Configuration
This chapter provides general information for configuring a VersaMax PNS and its IO modules
in a PROFINET-IO network. For information on configuring the PROFINET IO-Controller and its
network, refer to the IO-
Controller manufacturer’s documentation.
Note:
To configure a VersaMax PNS in an RX3i Controller system, refer to the
PACSystems
RX3i PROFINET Controller Manual,
GFK-2571.
This chapter discusses the following topics:
▪ Configuration Overview
o
Basic Configuration Steps
o
Configuration Tool
▪ Adding a VersaMax PROFINET Scanner to a LAN
o
Configuring VersaMax PROFINET Scanner Parameters
o
Adding VersaMax PROFINET Scanner Power Supplies
o
Adding VersaMax Modules to a Remote Node
o
Adding Power Supplies Between Modules
o
Configuring VersaMax Module Parameters
o
Configuring Analog Modules that have Jumpers
▪ Assigning IO-Device Names
▪ After the Configuration is Stored to the PROFINET IO-Controller
▪ Clearing the PROFINET IO-Controller Configuration
▪ Replacing PROFINET Scanner Hardware
Chapter
3
