manualshive.com logo in svg

GE V7865 Series, Справочник по аппаратуре, Страница: 55 / 84

Поделиться
Скачать
GE V7865 Series Скачать руководство пользователя страница 55

 Compliance 54

FCC Part 15

This device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions: (1) this device may not cause harmful interference, and 
(2) this device must accept any interference received, including interference that 
may cause undesired operation.

FCC Class A

NOTE

This equipment has been tested and found to comply with the limits for a Class A digital device, 

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 

against harmful interference when the equipment is operated in a commercial environment. This 

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used 

in accordance with the instruction manual, may cause harmful interference to radio 

communications.  Operation of this equipment in a residential area is likely to cause harmful 

interference in which case the user will be required to correct the interference at his own expense.

NOTE

Changes or modifications not expressly approved by the party responsible for compliance could 

void the user's authority to operate the equipment.

Canadian Regulations 

The V7865  Class A digital apparatus complies with Canadian ICES-003.

NOTE

Any equipment tested and found compliant with FCC Part 15 for unintentional radiators or 

EN55022 (previously CISPR 22) satisfies ICES-003.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание V7865 Series





















































































Отзывы:

Нет отзывов