manualshive.com logo in svg

GE V7865 Series, Справочник по аппаратуре, Страница: 26 / 84

Поделиться
Скачать
GE V7865 Series Скачать руководство пользователя страница 26

Handling and Installation  25

1.7 Front Panel

1.7.1  Connectors

The V7865 provides front-panel access to the PMC expansion site, the VGA 
connector, the two GbE connectors, the manual reset switch, COM1 port, two USB 
ports, the Mouse/Keyboard, and the status LEDs. A drawing of the V7865 front 
panel is shown in Figure 1-5 on page 26. The front panel connectors and 
indicators are labeled as follows:     

The V7865 provides rear I/O support for VME with 2eSST 320 MByte/s, the 
optional PMC I/O (Vita 35), DVI-D, two USB 2.0 ports, COM2 (RS232/RS422), and 
two SATA drives. These signals are accessed by the use of a rear transition module 
(RTM) such as the ACC-0602RC* or the ACC-0603RC*, which terminate the 
signals into industry standard connectors. The front panel connectors, including 
connector pinouts and orientation, for the V7865 are defined in 

Appendix A: 

Connectors and Pinouts.

NOTE

RTMs may not support all available V7865 rear I/O mentioned above. RTM connections are defined 

in the appropriate RTM Installation Guide. Contact Sales for compatible RTMs offered by GE  

Intelligent Platforms.

1.7.2  LEDs

See Figure 1-5 on page 26 for a diagram of the Rugged Front Panel option. 
Adjacent to the diagram are the definitions of the various LEDs on the front panel. 
The connections and the LEDs are the same for the Standard Front Panel option, 
which is shown in Figure 1-6 on page 27.

• LAN1

GbE connector

• LAN2

GbE connector

• VGA

VGA video connector

•  RST

Manual reset switch

• COM1

COM port

• M/K

Combination mouse/keyboard connector

• USB

USB connectors

• BPHT 

Status LEDs 

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание V7865 Series





















































































Отзывы:

Нет отзывов