manualshive.com logo in svg

GE V7865 Series, Справочник по аппаратуре, Страница: 40 / 84

Поделиться
Скачать
GE V7865 Series Скачать руководство пользователя страница 40

Standard Features  39

2.8 Video Graphics Adapter

High-resolution graphics and multimedia-quality video are supported on the 
V7865 using the 945GM/945GME (GMCH) chipset internal graphics controller. 
Screen resolutions up to 1,600 x 1,200 x 256 colors (single view mode) are 
supported by the graphics adapter

NOTE

Not all SVGA monitors support resolutions and refresh rates beyond 640 x 480 at 85 Hz. 

 

Do not attempt to drive a monitor to a resolution or refresh rate beyond its capability.

2.9 Digital Visual Interface (DVI-D) 

The V7865 supports a Digital Visual Interface - Digital that provides a high-speed 
digital connection for visual data types that are display technology independent. 
DVI-D is a display interface developed in response to the proliferation of digital 
flat-panel displays. 

DVI-D uses Silicon Image's PanelLink, a high-speed serial interface that uses 
Transition Minimized Differential Signaling (TMDS) to send data to the monitor. 
The DFP and VESA Plug and Display interfaces also use PanelLink. For this 
reason, DVI-D can work with these previous interfaces by using adapter cables 
(depending on the signal quality of the adapter.) 

DVI-D also supports the VESA Display Data Channel (DDC) and the Extended 
Display Identification Data (EDID) specifications. DDC is a standard 
communications channel between the display adapter and monitor. EDID is a 
standard data format containing monitor information such as vendor 
information, monitor timing, maximum image size, and color characteristics. 
EDID information is stored in the display and is communicated over the DDC. 
EDID and DDC enable the system, display and graphics adapter to communicate 
so that the system can be configured to support specific features available in the 
display. 

DVI-D can be accessed via GE Intelligent Platforms’ 

 

ACC-0602RC/ACC-0603RC rear transition module.

Table 2-6 Partial List of Display Modes Supported

Resolution

Bits Per Pixel (Frequency in Hz)

8-bit Indexed

16-bit

32-bit

640 x 480

60, 70, 72, 75, 85, 100, 120

60, 70, 72, 75, 85, 100, 120

60, 70, 72, 75, 85, 100, 120

720 x 1280

60, 75, 85, 100

60, 75, 85, 100

60, 75, 85, 100

768 x 1280

60, 75, 85

60, 75, 85

60, 75, 85

800 x 600

56, 60, 72, 75, 85, 100, 120

56, 60, 72, 75, 85, 100, 120

56, 60, 72, 75, 85, 100, 120

1,024 x 768

60, 70, 75, 85, 100, 120

60, 70, 75, 85, 100, 120

60, 70, 75, 85, 100, 120

1,152 x 864

60, 75, 85, 100

60, 75, 85, 100

60, 75, 85, 100

1,280 x 720

60, 75, 85, 100

60, 75, 85, 100

60, 75, 85, 100

1,280 x 960

60, 75, 85

60, 75, 85

60, 75, 85

1,280 x 1,024

60, 75, 85, 100, 120

60, 75, 85, 100, 120

60, 75, 85, 100, 120

1,600 x 900

60, 75, 85, 100, 120

60, 75, 85, 100, 120

60, 75, 85, 100, 120

1,600 x 1,200

60, 75, 85, 100

60, 75, 85, 100

60, 75, 85, 100

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание V7865 Series





















































































Отзывы:

Нет отзывов