49-2000707 Rev. 5
5
Controls
USING THE HOOD:
Controls / Chef Connect
Chef Connect Operation Bluetooth
®
Connection
To pair with another device:
To start the pairing process on the hood, press and hold
the
Light
button for 3 seconds. The backlight for all the
icons will flash until the hood is paired with the range or
other device. If the pairing is successful, the backlights of
all buttons will flash simultaneously three times and then
turn off. The hood lights and fan default sync setting will
be activated.
It will time out after 2 minutes if the pairing is not
completed, after which the pairing sequence will need to
be restarted.
To cancel pairing:
To cancel the pairing, hold the
Light
button down for 3
seconds and then turn off the hood.
Default Sync Settings:
The factory default setting for the light will be the brightest.
The factory default setting for the fan sync will be OFF.
The user can change the Default Sync Settings by
pressing and holding the
Med
button for 3 seconds.
This will enter the Default Settings Mode. Once in
this mode, the backlights for all buttons will blink on/
off indefinitely and the fan and light will switch to the
current Default Sync Setting, so the user knows what the
current default value is. At this time, set the light and fan
to the desired default levels. Once the user is satisfied
with the selection, press and hold the
Power
button
for 3 seconds. This will exit this mode. At that time the
backlights will stop blinking and the state of the fan and
light will change back to their prior state before entering
the Default Settings Mode.
Chef Connect
1. Rangehood Control Panel:
The control panel
is located under the front edge of the canopy. The
position and function of each control button are
noted below.
2. Fan
On/Off:
On/Off switch for the fan. The fan
can be operated by pressing any of the fan setting
buttons. Hold
Power
for 3 seconds to activate
Delay Off feature, which automatically turns the fan
off after 15 minutes. Low, Med and High buttons
LEDs will rolling blink to indicate Delay Off feature is
activated.
3. Fan
Settings:
Speed control for fan. Fan speed is
powered by
QuietBoost™ Technology.
This unique
technology is designed to minimize ventilation noise
and enhance motor efficiency for a peacefully-quiet,
odor-free kitchen. Press the button
Low
for LOW
speed,
Med
for MEDIUM speed, and
High
for HIGH
speed. Hold down the High button for 3 seconds to
activate the Boost speed that will run for 15 minutes.
High button LED will blink on/off to indicate Boost
feature is activated.
4. Light:
Off/On/Night Light switch for the LED lights.
Press the
Light
button to turn the lights on, again to
set the lights to night light setting, and again to turn
the lights off.
5. Chef Connect:
This is a Bluetooth
®
pairing feature
for use with other compatible Chef Connect enabled
products on a cooktop or range. When the device is
paired, the default sync settings will be activated upon
receiving a command from the range or cooktop. To
change the default sync setting, refer to the Chef
Connect section.
To pair devices, hold down the
Light
button for 3
seconds. To turn it back off, hold the button down for
another 3 seconds. See the Chef Connect section for
more details.
6. IR Sensor:
Remote control receiver when used
with remote control kit.
7. Wi-Fi:
Hold down the Low button for 3 seconds
to initiate the Wi-Fi connection. The Wi-Fi indicator
light turns on when connected, see the Wi-Fi
Connect section for details.
2ႇ
Low
Med
Fan Settings
High
Light
Chef Connect
To Pair
Hold 3 Sec
Boost
Hold 3 Sec
WiFi
Pairing
Delay O
ႇ
Hold 3 Sec
WiFi
1
6
2
4
5
7
3
