GE TLE Scalable 150/100 UL S1 Скачать руководство пользователя

Страница: 4 / 53

Critical Power

Modifications reserved

Page 4/53

GE_UPS_ISG_TLE_SUL_40K_M15_1US_V010.docx

Installation Guide TLE Scalable Series 40 - 150 UL S1

Preface

Congratulations on your choice of a

TLE Scalable Series 40 - 150

Uninterruptible Power

Supply (UPS).

It will help eliminate load disturbances due to unexpected power problem.

This

Installation Guide

describes how to prepare the installation site, and it provides

weight and dimensions and procedures for moving, installing and connecting the UPS.

Please refer to the accompanying

User Manual

, which describes the function of the UPS

module, the purpose and location of the switches, the meaning of the system events

related to the front panel indication, and provides procedures for starting and stopping

the equipment.

While every care has been taken to ensure the completeness and accuracy of this manual,

assumes no responsibility or liability for any losses or damages resulting from the use

of the information contained in this document.

WARNING!

TLE Scalable Series 40 - 150

is a product that needs to be installed by a licensed and

knowledgeable contractor.
Installation restrictions or additional measures may be needed to prevent disturbances.

We recommend that this manual be kept next to the UPS for future references.

If any problems are encountered with the procedures contained in this manual, please

contact your

Service Center

before you proceed.

This document shall not be copied or reproduced without the permission of

Some of the information contained in this manual may be changed without notice to

reflect technical improvements.

Safety instructions

Read the safety instructions contained on the following pages carefully before the

installation of the UPS, options and battery system.
Pay attention to the rectangular boxes included in the text:

They contain important information and warning concerning electrical connections and

personnel safety.

Parallel System version secured with RPA

When included in the text, this symbol refers to operation needed

only for RPA Parallel System.

Содержание TLE Scalable 150/100 UL S1






















































Результаты поиска

Содержание TLE Scalable 150/100 UL S1

Отзывы:

Похожие инструкции для TLE Scalable 150/100 UL S1

Бренды по названию

Популярные бренды

GE TLE Scalable 150/100 UL S1, Руководство по установке

Результаты поиска

Содержание TLE Scalable 150/100 UL S1

Отзывы:

Похожие инструкции для TLE Scalable 150/100 UL S1

Бренды по названию

Популярные бренды