GE TELUM ASLP11, Справочное руководство

Страница: 23 / 64

CHAPTER 2
Unpacking and Inspection
Chapter Scope
This chapter covers the suggested inspection and preparation considerations
and background information necessary prior to using the ASLP11. Unpacking,
initial inspection, and first-time operation of the ASLP11 are covered.
Following the procedures given in the chapter is recommended, since they will
verify proper operation after shipping and before the product is integrated into
your system.
ESD
Electrostatic Discharge Notice
The discharge of static electricity, known as Electro Static Discharge or ESD, is
a major cause of electronic component failure. The ASLP11 has been packed in
a static-safe bag which protects the board from ESD while the board is in the
bag. Before removing the ASLP11 or any other electronic product from its
static-safe bag, be prepared to handle it in a static-safe environment.
You should wear a properly functioning antistatic strap and ensure you are fully
grounded. Any surface upon which you place the unprotected ASLP11 should
be static-safe, usually facilitated by the use of antistatic mats. From the time the
board is removed from the antistatic bag until it is in the card cage and
functioning properly, extreme care should be taken to avoid “zapping” the
board with ESD. You should be aware that you could “zap” the board without
knowing it; a small discharge, imperceptible to the eye and touch, can often be
enough to damage electronic components. Extra caution should be taken in cold
and dry weather when static easily builds up.
GE Intelligent Platforms – ASLP11 Hardware Reference Manual, Third Edition Page 23