background image

– 56 –

Warranty

Refrigerator Warranty. 

(For customers in the United States)

All warranty service provided by our Factory Service Centers, 
or an authorized Customer Care

®

technician. To schedule service, 

on-line, 24 hours a day, visit us at ge.com, or call 800.GE.CARES
(800.432.2737). Please have serial number and model number
available when calling for service.

For The Period Of:

GE Will Replace:

GE and GE PROFILE MODELS:

One Year

Any part 

of the refrigerator which fails due to a defect in materials or workmanship.

From the date of the

During this 

limited one-year warranty, 

GE will also provide, 

free of charge, 

all labor and 

original purchase

related service to replace the defective part.

Thirty Days

Any part 

of the water filter cartridge which fails due to a defect in materials or workmanship.

(Water filter, if included) 

During this 

limited thirty-day warranty, 

GE will also provide, 

free of charge, 

a replacement water

From the original 

filter cartridge.

purchase date of 
the refrigerator

GE PROFILE MODELS ONLY:

Five Years

Any part of the sealed refrigerating system 

(the compressor, condenser, evaporator 

(GE Profile models only)

and all connecting tubing) which fails due to a defect in materials or workmanship.

From the date of the

During this 

limited five-year sealed refrigerating system warranty, 

GE will also provide, 

original purchase

free of charge,

all labor and related service to replace the defective part in the sealed 

refrigerating system.

Service trips to your home to teach you how to use 
the product.

Improper installation, delivery or maintenance.

Failure of the product if it is abused, misused, or used for
other than the intended purpose or used commercially.

Loss of food due to spoilage.

Replacement of house fuses or resetting of circuit
breakers.

Damage caused after delivery.

Replacement of the water filter cartridge, if included,
due to water pressure that is outside the specified
operating range or due to excessive sediment in the 
water supply.

Replacement of the light bulbs, if included, or water filter
cartridge, if included, other than as noted above. 

Damage to the product caused by accident, fire, floods 
or acts of God.

Incidental or consequential damage caused by possible
defects with this appliance.

Product not accessible to provide required service.

What GE Will Not Cover:

This warranty is extended to the original purchaser and any succeeding owner for products purchased for home
use within the USA. If the product is located in an area where service by a GE Authorized Servicer is not available,
you may be responsible for a trip charge or you may be required to bring the product to an Authorized GE Service
location for service. In Alaska, the warranty excludes the cost of shipping or service calls to your home.

Staple your receipt here. 

Proof of the original purchase

date is needed to obtain service

under the warranty.

EXCLUSION OF IMPLIED WARRANTIES—Your sole and exclusive remedy is product repair as provided in this
Limited Warranty. Any implied warranties, including the implied warranties of merchantability or fitness for a
particular purpose, are limited to one year or the shortest period allowed by law.

Содержание Profile PDCF1NBW

























































Отзывы: