– 51 –
Carefully lower the interface and disconnect the
2.
2 wire harnesses.
Remove the 4 Phillips-head screws and the
3.
cradle support from the dispenser recess.
Lift and remove the drip tray.
4.
Note:
There are 2 plastic wedges that help hold the
top of the trim
fl
ush against the door panel. If the
wedges are not installed the trim will
fi
t loosely.
Using a pair of long-nose pliers, pull out the 2
5.
plastic wedges.
Wire Harnesses
Wedge (1 of 2)
Note:
The dispenser trim is held to the dispenser
recess by 5 retaining tabs along each side and 2 at
the top.
Using your hands or a plastic putty knife,
6.
carefully lift or pry the dispenser trim away from
the dispenser recess.
