– 20 –
Control Features
4
About the controls with temperature settings.
The temperature controls are preset in the factory at
37°F
for the refrigerator compartment
and
0°F
for the freezer compartment. Allow 24 hours for the temperature to stabilize to the
preset recommended settings.
The temperature controls can display both the
SET
temperature as well as the actual
temperature in the refrigerator and freezer. The actual temperature may vary slightly from
the
SET
temperature based on usage and operating environment.
Setting either or both controls to
OFF
stops cooling in both the freezer and refrigerator
compartments, but does not shut off electrical power to the refrigerator.
For Controls-on-the-Door Models:
To change the temperature,
press and release the
WARMER
or
COLDER
pad. The
ACTUAL TEMP
light
will come on and the display will show the actual
temperature. To change the temperature, tap
either the
WARMER
or
COLDER
pad until the
desired temperature is displayed.
For Controls Inside the Refrigerator:
Opening the door displays the actual temperature.
To change the temperature, press either the
WARMER
or
COLDER
touch pads until the
desired temperature is displayed.
Once the desired temperature has been set,
the temperature display will return to the actual
refrigerator and freezer temperatures after 5
seconds. Several adjustments may be required.
Each time you adjust controls, allow 24 hours for the
refrigerator to reach the temperature you have set.
To turn the cooling system off,
tap the
WARMER
pad
for either the refrigerator or the freezer until the
display shows
OFF
.
To turn the unit back on,
press the
COLDER
pad for either the refrigerator or freezer.
Then press the
COLDER
pad again and it will go to
the preset points of
0°F
for the freezer and
37°F
for
the refrigerator. Setting either or both controls
to
OFF
stops cooling in both the freezer and
refrigerator compartments, but does not shut
off electrical power to the refrigerator.
Changing the Temperature
NOTE:
The refrigerator is shipped with protective film covering the temperature controls.
If this film was not removed during installation, remove it now.
(on some models)
(on some models)
