40
Safety Instructions
Operating Instructions
Care and Cleaning
Tr
oubleshooting T
ips
Consumer Support
Before You Call For Service…
Troubleshooting Tips
Save time and money! Review the charts on the following
pages first and you may not need to call for service.
Problem
Possible Causes
What To Do
Control signals after
You forgot to enter a bake
•
Touch
BAKE
and desired temperature or
entering cooking time
temperature or cleaning
SELF CLEAN
and desired clean time.
or delay start
time.
Food does not bake
Oven controls improperly set.
•
See the
Using the Oven
section.
or roast properly
Rack position is incorrect
•
See the
Using the Oven
section.
or the rack is not level.
Oven floor not in place.
•
Replace the oven floor.
Oven thermostat needs
•
See the
Adjust the Oven Thermostat—Do It Yourself!
adjustment.
section.
Food does not
Oven door is open.
•
Close the door. This model is designed for closed door
broil properly
broiling only. Always broil with the door closed.
Oven controls improperly set.
•
Make sure you touch
BROIL
.
Improper rack position
•
See the
Broiling Guide.
being used.
Food being cooked
•
For best results, use a pan designed for broiling.
in a hot pan.
Make sure it is cool.
Cookware not suited
•
For best results, use a pan designed for broiling.
for broiling.
The probe is plugged into the
•
Unplug and remove the probe from the oven.
outlet in the oven.
In some areas the power
•
Preheat the broil element for 10 minutes.
(voltage) may be low.
•
Broil for the longest period of time recommended in
the
Broiling Guide.
Clock and timer
A fuse in your home may be
•
Replace the fuse or reset the circuit breaker.
do not work
blown or the circuit breaker
tripped.
Oven controls improperly set.
•
See the
To Set the Clock
and
Kitchen Timer and Control
Lockout
sections.
Oven light does
Light bulb is loose or defective.
•
Tighten or replace the bulb.
not work
The oven is self-cleaning or
•
The oven lights do not come on during self-cleaning
the Sabbath option is set.
or if the Sabbath option is set.
Pad operating light is broken.
•
Call for service.
Control keys activate or
Control panel is dirty, or there
•
Clean control panel with a vinegar and water solution,
LCD changes screens
is residue from liquid cleaners.
and polish dry with a soft cloth.
(
See the
Care and
when I open the oven door
Cleaning
section.)