GE PACSystems RXi Box IPC, Руководство пользователя

Страница: 10 / 44

Introduction
GFK-2785C PACSystems* RXi Box IPC 5
Power On/Off Switch and Status Indicator Operation
Normal Operation
†
Action
Power up the IPC Press and hold the button for at least ½ second.
If powering up from a no-power state, the ring LED blinks blue while the IPC is
booting and is solid green when the IPC is up and running.
For ICRXIBN7x000A-CA or earlier only: If the system has been shut down, but
power has not been cycled, the ring LED immediately turns solid green.
For all other versions the ring LED blinks blue for 40 seconds before changing to
solid green.
Shut down the IPC Press and hold the button briefly (between 100ms and 4 seconds).
The ring LED stays green while the IPC is shutting down and then turns off when
the IPC is powered down.
Sleep Mode The default BIOS settings when shipped from the factory are:

“Enable Hibernation” is disabled

ACPI Sleep State is “S1 (CPU Stop Clock)”
The default settings send IPC to sleep state S1.
ICRXIBN7x000A: The ring LED stays green while the IPC is in Sleep State S1.
The ring LED turns off while the IPC is in Sleep State S3
ICRXIBN7x001A: The ring LED stays green while the IPC is in Sleep State S1.
The ring LED fades blue while the IPC is in Sleep State S3.
Forced Shut down Caution: Use this option only if the operating system is non-responsive:
Press the button for at least 4 seconds.
The ring LED turns off.
†
The ring LED displays solid red to indicate a fault, including Overtemp condition.
IPC Status Indicators Operation
Indicator State Description
SATA Drive Status
White, blinking Read/write access on SATA drive.
Overtemp
Red, solid The IPC’s internal temperature has exceeded the
maximum allowable value.
To recover, let the IPC cool, then press the Power On/Off
switch.
Ethernet Port LEDs Operation
Each Ethernet port has two LED indicators, ACTIVITY and LINK .
LED
LED State
Operating State
ACTIVITY Blinking, Green Traffic is detected at the port.
LINK On, Green The link is operational.