GE Optica Скачать руководство пользователя страница 89

Страница: 89 / 150

January 2006

5-8

Programming the 4x40 Optica

Automatic Cleaning and

Balance Function

Note:

For Optica Analyzers with earlier versions of software, see

Appendix F

Optica Analyzers with version XXX software have been upgraded to
include the ability to program the PACER self-cleaning and
rebalancing cycle to run once per day at a preset time. This is referred
to as a

Clock Time Interval

. When the unit is programmed in this

manner, the front panel PACER softkey is disabled. The

Elapsed Time

Interval

initiates the PACER at a preset time after the last PACER was

run. The automatic balance cycle will always run upon power up of
the analyzers.

To program the

Automatic Cleaning & Balance Function

on the

Optica 4X40 monitor:

Make sure the internal clock of the Optica has the correct time.
From the main screen:

Press the

ENTER

key.

Press the

DOWN

soft key until

Set Time and Date

displayed.

Press the

>>>>

soft key.

Press the

>>>>

soft key.

Highlight the

Date

and

Time

fields using the tab key. Use the

keypad and softkeys to set the correct time.

Содержание Optica























































































































































Результаты поиска

Содержание Optica

Отзывы:

GE Optica, Руководство оператора, Страница: 89 / 150

Результаты поиска

Содержание Optica

Отзывы: