manualshive.com logo in svg

GE NX-4-EUR, Руководство по установке

Поделиться
Скачать
GE NX-4-EUR Скачать руководство пользователя страница 59

 

       

 

LOCATION 64 - KEYPAD AUXILIARY 2 COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (2 segments, 

numerical data) 

Location 64 contains the tens and ones digits that will be sent for a 4+2 and 3+1 format if the 

keypad “Auxiliary 2” (MEDICAL) is enabled in the partition feature selection. Segment 1 

contains the tens digit; segment 2 contains the ones digit.  

For a 3+1 format, only the segment 1 digit (tens) will be sent. 

 

LOCATION 65 - KEYPAD PANIC COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (2 segments, numerical 

data) 

Location 65 contains the tens and ones digits that will be sent for a 4+2 and 3+1 format if the 

keypad “Panic” is enabled in the partition feature selection. Segment 1 contains the tens digit, 

and segment 2 contains the ones digit.  

For a 3+1 format, only the segment 1 digit (tens) will be sent. 

 

LOCATION 66 - KEYPAD MULTIPLE CODE ENTRY TAMPER COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY 

(2 segments, numerical data) 

Location 66 contains the tens and ones digits that will be sent for a 4+2 and 3+1 format if the 

keypad “Multiple Code Entry” (Tamper) is enabled in the partition feature selection. Segment 1 

contains the tens digit, and segment 2 contains the ones digit.  

For a 3+1 format, only the segment 1 digit (tens) will be sent. 

 

LOCATION 67 - BOX TAMPER / BOX TAMPER RESTORE COMMUNICATOR CODE, SLOW SPEED  FORMATS ONLY     

(4 segments, numerical data) 

Location 67 contains the tens and ones digits that will be sent for a 4+2 and 3+1 format if the 

“Box Tamper” feature is enabled in location 37. Segment 1 contains the tens digit of the “Box 

Tamper”. Segment 2 contains the ones digit of the “Box Tamper”. Segment 3 contains the tens 

digit of the “Box Tamper Restore”. Segment 4 contains the ones digit of the “Box Tamper 

Restore”.  

For a 3+1 format, only the segment 1 resp. segment 3 digit (tens) will be sent. 

 

LOCATION 68 - AC FAIL / AC FAIL RESTORE COMMUNICATOR CODES, SLOW SPEED FORMATS ONLY (4 segments, 

numerical data) 

Location 68 contains the tens and ones digits for a 4+2 and 3+1 format that will be sent if “AC 

Fail Reporting” is enabled. Segment 1 contains the tens digit of the “AC Fail Reporting”. 

Segment 2 contains the ones digit of the “AC Fail Reporting”. Segment 3 contains the tens digit 

of the “AC Fail Restore”. Segment 4 contains the ones digit of the “AC Fail Restore”.  

For a 3+1 format, only the segment 1 resp. segment 3 digit (tens) will be sent. 

 

NX-4-EUR Installation manual 

Page 59 

 02/07/06 

Содержание NX-4-EUR





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды