SLOW COMMUNICATOR FORMAT CODES
NX-6V2 Control
23
LOCATIONS 56- 83 ARE ONLY USED WHEN REPORTING EVENTS TO A PAGER OR USING A SLOW FORMAT SUCH AS 4+2.
When using Contact ID or SIA, there is no need to program these locations.
The digit programmed in each of the following locations will be sent as the upper HEX digit in place of the alarm event code. The zone ID or
user ID will always be reported as the lower HEX digit (1-F). For example, if the zone ID or user ID is 15, the 4+2 lower digit will be “F” and if
the zone ID or user ID is 16, the 4+2 digit will be “1”. See Appendix 4 on page
Error! Bookmark not defined.
. NOTE: If Segment 2 is left as
“0” (unprogrammed), it will follow the Segment 1 selection. If Segment 1 is left as “0” and the feature is enabled in Location 23, the NX-6V2
will report “A”.
56 RESTORE
COMMUNICATOR CODE
2............. numerical
Location 56 contains the event code for any zone "Restore" for a 4+2 format. (Box on pg 23.)
Segment 1
= Partition 1
Segment
2
= Partition 2
57 BYPASS
COMMUNICATOR CODE
2............. numerical
Location 57 contains the event code for a zone "Bypass" for a 4+2 format. (Box on pg 23.)
Segment 1
= Partition 1
Segment
2
= Partition 2
58 TAMPER
COMMUNICATOR CODE
2............. numerical
Location 58 contains the event code for a zone "Tamper" for a 4+2 format. (Box on pg 23.)
Segment 1
= Partition 1
Segment
2
= Partition 2
59 TROUBLE
COMMUNICATOR CODE
2............. numerical
Location 59 contains the event code for a zone "Trouble" for a 4+2 format. (Box on pg 23.)
Segment 1
= Partition 1
Segment
2
= Partition 2
60
SENSOR LOW BATTERY COMMUNICATOR CODE
2............. numerical
Location 60 contains the event code for a zone "Sensor Low Battery" for a 4+2 format. (Box on pg 23.)
Segment 1
= Partition 1
Segment
2
= Partition 2
61
SENSOR MISSING COMMUNICATOR CODE
2............. numerical
Location 61 contains the event code for a zone "Sensor Missing" for a 4+2 format. (Box on pg 23.)
Segment 1
= Partition 1
Segment
2
= Partition 2
62 DURESS
COMMUNICATOR
CODE 2............. numerical
Location 62 contains the digits that will be sent for a 4+2 format if the “Duress” code is enabled in location 44. (Box on pg 23.)
63
KEYPAD AUXILIARY 1 COMMUNICATOR CODE
2............. numerical
Location 63 contains the digits that will be sent for a 4+2 format if the keypad "Auxiliary 1" (Fire) is enabled in the partition feature
selection. (Box on pg 23.)
64
KEYPAD AUXILIARY 2 COMMUNICATOR CODE
2............. numerical
Location 64 contains the digits that will be sent for a 4+2 format if the keypad "Auxiliary 2" (Medical) is enabled in the partition feature
selection. (Box on pg 23.)
65
KEYPAD PANIC COMMUNICATOR CODE
2............. numerical
Location 65 contains the digits that will be sent for a 4+2 format if the keypad "Panic" is enabled in the partition feature selection. (Box
on pg 23.)
66
KEYPAD MULTIPLE CODE ENTRY TAMPER COMM CODE
2............. numerical
Location 66 contains the digits that will be sent for a 4+2 format if the keypad "Multiple Code Entry" (Tamper) is enabled in the partition
feature selection. (Box on pg 23.)
67
BOX TAMPER / RESTORE COMMUNICATOR CODE
4............. numerical
Location 67 contains the digits that will be sent for a 4+2 format if the "Box Tamper" feature is enabled in location 37. Segments 1 & 2
contain the digits of the "Box Tamper". Segments 3 & 4 contain the digits of the "Box Tamper
Restore". (Box on pg 23.)
68
AC FAIL / RESTORE COMMUNICATOR CODE
4............. numerical
Location 68 contains the digits for a 4+2 format that will be sent if "AC Fail Reporting" is enabled. Segments 1 & 2 contain the digits of
the "AC Fail". Segments 3 & 4 contain the digits of the "AC Fail Restore". (Box on pg 23.)
69
LOW BATTERY / RESTORE COMMUNICATOR CODE
4............. numerical
Location 69 contains the digits for a 4+2 format that will be sent if "Low Battery Reporting" is enabled. Segments 1 & 2 contain the
digits of the "Low Battery Reporting". Segments 3 & 4 contain the digits of the "Low Battery Restore". (Box on pg 23.)
Содержание NetworX NX-6V2
Страница 5: ...NX 6V2 Control 5 IV WIRING DIAGRAM ...
Страница 30: ...30 NX 6V2 Control NOTES ...
Страница 51: ......
