GE Multilin DDFR, Инструкция по эксплуатации

Страница: 55 / 118

DISTRIBUTED DIGITAL FAULT RECORDER – INSTRUCTION MANUAL 47
Distributed Digital Fault Recorder
Chapter 3: DDFR Configuration
GE Consumer & Industrial
Multilin
DDFR Configuration
3.1 Configuration Options
3.1.1 Configuration - An Explanation
Having set up your DDFR(s) for Ethernet communication, the next stage is to configure the
settings of the DDFR(s) - that is, set up an environment that will allow each DDFR to
communicate with all the relays ("devices") connected to it. In order to do this, the
EnerVista DDFR Setup Software lets you create what are known as
Settings Files .
You can create and configure your Settings Files offline (see section 3.3.2), but because the
DDFR Setup has password protection that limits individual access to the DDFR units, you
must set up your password before you attempt to go online to configure the individual
DDFRs on your system. By default, the security functionality in the DDFR Setup is set to
OFF.
3.1.2 Password Accessibility Groups
The DDFR system operates with several default password accessibility groups. Individuals
added to these groups are automatically given the rights associated with that group.
• Administrators have full rights to make changes or send commands to the DDFR.
Those with Administrator rights also have access to change the security rights of
any accessibility group or user on the DDFR.
• Users have rights applied to them, selected according to their requirements, by
the Administrator.
The available rights are as follows:
• Data Entry
• Actual Values
• DDFR Lock
• DDFR Setup