GE Multilin DDFR, Инструкция по эксплуатации

Страница: 98 / 118

90 DISTRIBUTED DIGITAL FAULT RECORDER – INSTRUCTION MANUAL
VIEWING DATA IN THE DDFR ARCHIVER CHAPTER 5: RETRIEVING AND VIEWING DDFR ARCHIVER DATA
Toolbar – Click these control buttons to activate the most-often-used
commands.
Status Bar – The status bar is located at the bottom of the main window and
provides messages about Event/Alarm Viewer's current status, such as the
presence of unacknowledged alarms.
To
sort the event data, click on one of the column headings (such as
CreatedTime, EventType, SourceName, etc.) to sort accordingly.
Z Click the View option on the Menu Bar
The View option gives you a choice of presentation modes, allowing you to choose
whatever types of events are relevant to your situation.
For example choosing
Sequence Of Events brings up a Display Window (shown in figure 5-
6, above) that consists of ALL the events captured by the DDFRs: Device Events, Device
Alarms System Events and Waveform Events.
The Display Window that comes up initially when you click on Events - that is the default
Data Display Window - can be changed to any of the Display windows offered. To change
the default Display Window,
Sequence of
Events
Device Events
Alarms System Waveform
Viewer
Configuration
Refresh Unacknowledged
Alarms
About