GE Monogram ZVC30LSS, Руководство по установке, Страница: 14 / 24

14
Installation Preparation
REMOTE MOUNTING OF THE CONTROL
(WIRED)
WARNING:
Disconnect electrical
power from unit before beginning remote control
installation. Failure to do so could result in personal
injury or damage to the electrical controls.
AVERTISSEMENT :
Il faut
débrancher l’alimentation électrique de l’appareil
avant de commencer l’installation de la commande
à distance. Il faut suivre cette directive pour éviter
des blessures ou endommager les commandes
électriques.
REMOTE LOCATION FOR CONTROL
The control can be removed from the hood and
installed in a backsplash or countertop.
• A cover plate is provided to cover the opening in
the hood when the control is removed.
• A 30-ft. length of 4-wire cord is supplied to
accommodate most installations. Because only
30-ft. of cord is provided, careful consideration
must be given to the location of the remotely
mounted control.
NOTE: Not for telecommunication (telephone)
network.
• The cord must be routed through the holes in the
insert sleeve, and the rubber grommets put into
place around the cord.
NOTE: On the ZVC30 and ZVC36 models, the cord
needs to be routed through the holes in the insert
sleeve before the damper plate is installed.
• Route the cord through the conduit to reach the
installation location of the control.
1-11/16
″
3-11/16
″
Control cutout