GE Masoneilan VECTOR V1100, Инструкция по эксплуатации

Страница: 30 / 60

VECTOR V1100 Wireless Adapter
30
GE Oil & Gas
Alerts
The VECTOR V1100 detects and logs system events to alert you when something has occurred
that could effect system operation.
NOTE
All Alerts are also mapped into HART Command 48 status bits.
Active Alerts
The condition that causes the alert is still present. Active alerts cannot be cleared - corrective
action must be taken to eliminate the alert, such as modifying some external source of the
event (such as the power supply) or by changing an incorrect VECTOR V1100 setting.
Alert History
The condition that caused the alert is no longer present, or the alert is a onetime event. The
start timestamp indicates when this alert first occurred and the stop timestamp indicates
when the alert stopped (or the last time the alert was detected).
Clear Alert (method)
This clears the current alert.
Clear All Alerts (method)
This clears the entire VECTOR V1100 alert history.
ALERT – Direct Power Out of Range
Description :
The VECTOR V1100 is configured for Direct Power Mode and the voltage on the Direct Power
input is outside of the allowable VECTOR V1100 operating range.
Corrective Action :
Correct the Direct Power source supply.
Timestamps :
Start: Set when the alert is first detected.
Stop: Set when the alert state goes away.