manualshive.com logo in svg

GE M60, Инструкция по эксплуатации

Инфотел M60 - это удобное устройство для коммуникации, которое обеспечивает простую и быструю установку. Для более подробной информации и руководства по установке, вы можете скачать бесплатное руководство на нашем сайте.(manualshive.com) Не упустите возможность ознакомиться с руководством перед началом использования продукта.

Поделиться
Скачать
background image

M60 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL

2-1

M60 Motor Protection System

Chapter 2: Product description

Product description

This chapter outlines the product, order codes, and specifications.

2.1  Product description

The M60 Motor Protection System is part of the Universal Relay (UR) series of products. It is a microprocessor-based relay 
for the protection and management of medium and large motors.
Overvoltage and undervoltage protection, thermal overload, fault diagnostics, and remote terminal unit (RTU) functions are 
provided. The M60 provides phase, neutral, ground and negative sequence, instantaneous and time overcurrent 
protection. The time overcurrent function provides multiple curve shapes or FlexCurve™ for optimum co-ordination.
The relay also features an enhanced thermal model with custom curves, current unbalance biasing, and running and 
stopped exponential cooling curves. An optional resistance temperature detector (RTD) module allows for the thermal 
model RTD bias function. Motor start and supervision functions include starts per hour, time between starts, restart time, 
acceleration time, emergency restart, and start inhibit. Sensitive directional power, mechanical jam, and current 
unbalance elements are included as standard functions. Additional functions that are not part of the standard M60 
element set can be easily configured and implemented using the FlexElement™ and FlexLogic™ functionality.
Voltage, current, and power metering are built into the relay as standard features. Current parameters are available as 
total waveform root mean square (RMS) magnitude, or as fundamental frequency only RMS magnitude and angle (phasor).
Diagnostic features include an event recorder capable of storing 1024 time-tagged events, oscillography capable of 
storing up to 64 records with programmable trigger, content, and sampling rate, and data logger acquisition of up to 16 
channels, with programmable content and sampling rate. The internal clock used for time-tagging can be synchronized 
with an IRIG-B signal, using the Simple Network Time Protocol (SNTP) over the Ethernet port, or using the Precision Time 
Protocol (PTP). This precise time stamping allows the sequence of events to be determined throughout the system. Events 
can also be programmed (via FlexLogic equations) to trigger oscillography data capture that can be set to record the 
measured parameters before and after the event for viewing on a computer. These tools significantly reduce 
troubleshooting time and simplify report generation in the event of a system fault.
Several options are available for communication. An RS232 port (USB port with the graphical front panel) can be used to 
connect to a computer for the programming of settings and the monitoring of actual values. The rear RS485 port allows 
independent access by operating and engineering staff. It can be connected to system computers with baud rates up to 
115.2 kbps. All serial ports use the Modbus RTU protocol. The IEC 60870-5-103 protocol is supported on the RS485 
interface. IEC 60870-5-103, DNP, and Modbus cannot be enabled simultaneously on this interface. Also only one of the 
DNP, IEC 60870-5-103, and IEC 60870-5-104 protocols can be enabled at any time on the relay. When the IEC 60870-5-103 
protocol is chosen, the RS485 port has a fixed even parity and the baud rate can be either 9.6 kbps or 19.2 kbps. The 
100Base-FX or 100Base-TX Ethernet interface provides fast, reliable communications in noisy environments. The Ethernet 

Содержание M60





































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для M60

Balboa GL Series User Manual preview
GL Series
Бренд: Balboa Страницы: 12
Paoli F1 Operating And Maintenance Manual preview
F1
Бренд: Paoli Страницы: 16
Galcon 6100 Series Installation And Operating Instructions Manual preview
6100 Series
Бренд: Galcon Страницы: 32
KAR-TECH MICRO Installation And Operation Manual preview
MICRO
Бренд: KAR-TECH Страницы: 28
2M Technology 2MTHFR-2M Quick Manual preview
2MTHFR-2M
Бренд: 2M Technology Страницы: 17
2iB SC10 Quick Start Manual preview
SC10
Бренд: 2iB Страницы: 5
2gig Technologies Go!Control Panel Installation & Programming Manual preview
Go!Control Panel
Бренд: 2gig Technologies Страницы: 78
Eaton CF2000 Installation And Operation Manual preview
CF2000
Бренд: Eaton Страницы: 100
Velleman VM130V2SET Quick Start Manual preview
VM130V2SET
Бренд: Velleman Страницы: 26
Velleman VM151 Manual preview
VM151
Бренд: Velleman Страницы: 32
Velocity MMP Operation And Maintenance Manual preview
MMP
Бренд: Velocity Страницы: 84
JASTEC JAS-U2-2018 User Manual preview
JAS-U2-2018
Бренд: JASTEC Страницы: 18
asalvo baby 16614 Instruction Manual preview
16614
Бренд: asalvo baby Страницы: 84
GEM DG-2000 Series Operation Manual preview
DG-2000 Series
Бренд: GEM Страницы: 17
Westlock DIGITAL EPIC-2 DTM User Manual preview
DIGITAL EPIC-2 DTM
Бренд: Westlock Страницы: 33
WEST MLC 9000 Plus Quick Start Manual preview
MLC 9000 Plus
Бренд: WEST Страницы: 2
Sames Inocoat Inobox Instruction Manual preview
Inocoat Inobox
Бренд: Sames Страницы: 84
G-Force UNDER CONTROL CP-28 User Manual preview
UNDER CONTROL CP-28
Бренд: G-Force Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды