GE LOGIQ A100, Техническая публикация

Страница: 180 / 408

OB Measurements
164
LOGIQ
t α
100 User Manual
2211157–100 Rev 0
Hip Measurement with Caudal Left Orientation
Select [9] in the Main Menu in U.S and Australian
Version and in the Sub Menu in European Version.
Horizontal Display line #1 appears on the screen.
Use the
TRACKBALL and GAIN/ROTATE knob to
position the line #1 as the baseline. It can be rotated
up to 45
_
either in the clockwise or counter
clockwise direction from the horizontal line.
Press
MEASUREMENT or SET, display line #2
appears on the screen. The Greek letter beta (
b
)
appears halfway between lines 1 & 2 and the angle is
55
_
by default which is clockwise to line #1.
Use the TRACKBALL and GAIN/ROTATE knob to
position the line #2. With this rotation
b
varies
between 0
_
and 90
_
in the clockwise direction with
reference to line #1.
Press MEASUREMENT or SET, display line #3
appears on the screen. The Greek letter alpha (
T
)
appears halfway between lines 1 and 3 and the angle
is 60
_
by default which is counter clockwise from
line #1. In the Calculation Result Area, the results of
angles
T
and
b
appear.
Use the TRACKBALL and GAIN/ROTATE knob to
position line #3. With this rotation
T
varies between
0
_
and 90
_
in the counter clockwise direction with
reference to line #1.
If any of the three line placements are not
satisfactory, each line can be reactivated by pressing
MEASUREMENT.
Press SET to fix line #3.
Should further measurements need to be taken,
press
SET again to invoke Display line #1 and follow
the procedure as indicated above. Upto four results
of angles
T
and
b
can be displayed at the same time.
The Left/Right ROTATE keys can also be used to
rotate the display lines.
Meas
Meas
TB
TB
TB
9
.
Hints