GE JSP28, Инструкция по использованию и уходу

Страница: 25 / 36

Self-Cleaning
You may notice some white ash in the oven. Just wipe
it up with damp cloth after the oven cools.
white spots remain, remove them with soap-filled
wool pad. Be sure to rinse thoroughly with
vinegar and water mixture. These deposits are usually
a salt residue that cannot be removed by the clean cycle.
If the oven is not clean one clean cycle,
repeat the cycle.
NOTE: No
functions can be programmed
before the
door automatically unlocks.
How
to Set Delay Start of Cleaning
Quick Reminder:
1. Press the CLEAN pad.
2. Press the INCREASE or DECREASE pad
until the desired Clean Time appears.
Press the STOP TIME pad.
4. INCREASE or DECREASE until
the desired Stop Time appears in the display.
Start is setting the oven timer to start the clean
cycle automatically at a later time than the present
time day.
NOTE: Before beginning, make sure the oven clock
shows the correct time
day.
1. the steps in the Before a Clean Cycle
section.
2,
CLEAN
A 3
“
4.
STOPTIME
Press the CLEAN pad.
Press the INCREASE or DECREASE
pad to enter Clean Time.
Press the STOP TIME pad. “STOP
TIME” and the earliest Stop Time you
can set will appear in the display.
5. Press the INCREASE pad to change the Stop Time
to a later time day desired. For example: If
you set Stop Time at 11
oven will start clean
cycle at and end at 11 The door latches
automatically.
The self-clean cycle will automatically begin after
“CLEAN” displayed and the time for clean cycle
is set. The words “ON” and “LOCK” will appear in
the display. It will not be possible to open the oven
door until the temperature drops below the lock
temperature and the LOCK light goes off.
6. When the LOCK light is off, open the door.
NOTE:
●
During a delayed self-clean operation you can find
out
when the oven is set to turn on by pressing and
holding the CLEAN pad for 3 seconds.
●
A fan may automatically turn on and off to cool
internal parts. This is normal, and the fan may
continue to run after the oven is turned off.
(continued
The earliest Stop Time will be the Clean Time
selected plus the time of day. For example: If the
Clean Time is three hours and the time of day is
the Stop Time that appears in the display will be
25