Use This Problem Solver
PROBLEM
POSSIBLE CAUSE AND REMEDY
MODULES ARE
ma
y
be
in
main distribution
of
by a
circuit
a
breaker,
main fuse
main circuit breaker,
PROPERLY
nature the
supply. If a circuit breaker is involved, reset it.
If
box uses fuses,
circuit fuse (a cartridge-type) should be changed
BUT ONLY BY
WITH
CIRCUITS. If,
of these procedures, the fuse blows circuit breaker trips
again, call
service.
Apartment tenants or condominium owners
request their building
management to perform
calling for service.
* Controls are not properly set or wrong control is set for the module or element you
are
●
unit
not
in properly.
heat—switch the module
other side of
If it
operates on that side, then switch may beat fault. If it does
heat, indications are
there is a malfunctioning component in
module.
Surface units are
plugged in solidly.
ARE
●
pans are not set securely the range top,
are not
surface unit
set for unit
are
OR
Grill Heating Unit is not plugged in solidly.
I
●
or Griddle unit controls are
properly set.
PROPERLY
entire
to
front and rear surface unit
controls the side of
module is placed.
* Griddle was not pre-seasoned before first use. Surface of grill or griddle was not
greased before cooking.
Heat setting is too
instruments or abrasive cleaners.
grate are causing excess smoke.
MEATS
Fats
trimmed from
prior to cooking.
*
. Some smoke and odor normal when using
disk elements for the
time and
after
cleaner.
28
